Veeam Certified Engineer 2021
Last Update Apr 27, 2024
Total Questions : 188
We are offering FREE VMCE2021 Veeam exam questions. All you do is to just go and sign up. Give your details, prepare VMCE2021 free exam questions and then go for complete pool of Veeam Certified Engineer 2021 test questions that will help you more.
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
Which recovery verification tests can be executed when verifying both backups and replicas? Choose three options.
Veeam ONE has been Installed and configured. The administrator needs to monitor the VMware datastore capacity. Where can this information be found?
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
Veeam ONE has been Installed and configured. It is necessary to monitor the three Veeam Backup & Replication servers in order to see how much backup storage is being used on the performance and capacity tiers of the backup repository server. How can this be achieved?
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)
Offloading backup files to the capacity tier of a scale out repository can be done automatically by leveraging what type of job?
A scale-out backup repository is configured with data locality policy. How is an extent selected during an active full backup? (Choose two.)
A company has outgrown their current data center and plans to use the second data center as the new primary and needs to migrate their workloads. They are running VMware in both data centers. Which steps would allow this migration to occur without any data loss?
An Infrastructure with 50 VMs has Issues with the underlying storage. 10 large VMs show the error "NVRAM write failure. Which restore method will bring back those VMs to the production state?
The configuration database is corrupted, and the backup administrator wants to recover the data. Which configuration restore mode should be used?
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
Exhibit:
Look at the diagram. This daily backup job has been running for over 30 days and no active full backups have been taken since the first run. Which of the following best describes the backup job?
Which is a prerequisite in order for the CRC check to be executed during a SureBackup Job?
Which of these repository types CANNOT be an extent of a scale-out backup respository? Choose two options.
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?
What is the purpose of scheduling a virtual Synthesized full backup for tape jobs?
A company wants to ensure that, during a replication failover, database servers boot before the application servers. How can this be accomplished?
Which of the following need to be performed in order to switch from the original VM to a VM Replica and then to use this replica as the original VM?
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?
Sometimes snapshots are "lost" by vCenter. What tool finds and removes those lost snapshots?
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site. When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company’s disaster recovery site.
Which Veeam feature allows for an administrator to help ensure general data protection regulation (GDPR) compliance?
A Veeam backup administrator is working with a VMware environment. Their company has an application that uses a contact database. Customers can be added to a "Do not contact" list. This server needs to be restored from yesterday's backup. What restore process allows for custom scripting to be run automatically to ensure the "Do not contact" list is updated before the server is returned to production?
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
A company needs to ensure that, during a disaster, a group of VMs starts in a certain order with time deploys between starting each VM. How can this be accomplished?
An SMB customer installed Veeam Backup & Replication in a simple deployment. How can the customer comply with the 3-2-1 rule?
Which Veeam Backup & Replication functionality allows a VM to be powered on directly from a backup file?
In Veeam Enterprise Manager, what granular restoration permission can be set for the Restore Operator role?
An administrator has decided to set up a VM backup job covering their Microsoft SOL servers. What feature must be enabled to ensure quiescence of the SQL databases during the backup?
15 VMs are running on a Hyper-V platform and five physical servers at a remote office (ROBO). The administrator has been tasked with setting up centralized off-site backups at the headquarters (HQ). The available bandwidth is 50 Mbps. RPO is set to six hours and the data generated for the interval is 500 GB. WAN accelerators can be added if necessary. Which of the following will achieve the RPO?
A backup job is configured as follows.
How many full and incremental restore points will be in a repository on day 16 at 23:00?
An administrator accidentally deleted a database. Veeam Explorer for Oracle will be used to restore it back. What is the fastest option to get the database online again?
Veeam ONE has been installed and configured. The infrastructure contains five Veeam Backup & Replication servers.
The administrator needs to check the remaining capacity on each of the backup repository servers. Where can they see this information?
A physical Linux file server needs to be migrated to VMware ESXi. The server has several volumes: /dev/sda (60GB), /dev/sdb (1TB) and /dev/sdc (4TB). What is the quickest option to migrate the server?
Backup jobs are configured to local repositories. Backups must be sent from Site B to the repository on Site A. The connection allows direct backups to complete within the backup window. Impact on the source VMs at Site B should be minimized. Which type of job and Veeam components should be used to provide the necessary protection?
A planned failover of three VMs has just completed successfully, starting the VMs at the disaster recovery location. What next actions are available for the failover plan?
Which of the following backup types are valid for both Veeam Agent for Microsoft Windows and Veeam Agent for Linux? (Choose two.)
A physical Linux server protected by a centrally managed Veeam agent is physically damaged. A VMware vSphere infrastructure is available, and the physical server is eligible for virtualization. Which recovery step provides the lowest possible RTO?
Due to an unexpected power outage, Site A is completely down. The disaster recovery strategy was implemented (see diagram). What is the correct way to start replicated VMs on Site B, while ensuring you can failback after Site A comes back online?
A backup administrator decided to move the Veeam Backup & Replication server and configuration database to new servers. Which configuration restore mode should be used?
A file on a Windows VM hosted on vSphere is corrupted and must be restored. VMware tools are installed and up to date on the VM. For some reason, the Veeam mount server cannot connect to the VM through the network. Which of the following restore methods provides the fastest restore (RTO)?
A company needs to recover a VM from VMware very quickly. The company decides to use Instant VM Recovery from their last backup. What platforms can this backup be instantly restored to? (Choose three.)
A Scale-out Backup Repository with one local extent has been configured as follows.
12 VMware VMs are being backed up daily by a forward incremental backup job, which has a 31-day retention, creating synthetic fulls on Saturdays. After running for more than 31 days, which of the following would be accurate?
A director in a business needs a folder of traffic photos restored from a Linux server. This machine sits on a VM backed up by Veeam Backup & Replication. The director wants the files restored to their original location and does not want to lose the original files. What functionality will be used to restore the folder using the Veeam Guest OS restoration wizard?
A Veeam administrator is creating a protection group that needs to back up all servers for the accounting department using Veeam Agent for Microsoft Windows. New accounting servers must be automatically added to the protection group. How is this accomplished?
An administrator needs to configure a backup job that dynamically adds new VMware hosted SQL servers. How can this be accomplished?
In the war against ransomware, a company decided to implement tape backup for the first time. The tape library has already been added. Of the following, what must be done first?
A director has asked for a quarterly report for capacity planning purposes. Which Veeam component should be used?
Which of the following are valid export options for Microsoft SQL Server items when using the Veeam Explorer for Microsoft SQL? (Choose two.)
An infrastructure with 50 VMs has a power outage. After the VMware cluster has booted up again, 10 medium-sized VMs have corrupted VM disk files. Which action can be used to restore the VMs back to the production state?
A Veeam proxy server is configured as follows. No modifications are allowed to the transport mode.
When performing a restore of a thin-provisioned VMware virtual disk on an NFS data store using this proxy server, what transport mode will be used by default?
A daily backup job for seven Hyper-V VMs has been configured at the main site, keeping 14 days’ worth of backup files. They want to get a copy of the VM backups to a repository at the disaster recovery site. They want to keep six months’ worth of backup files at the disaster recovery site. They also need to be able to restore the VMs to any given day within two months and any given week within six months. How should a backup copy job be configured to meet these requirements?
After performing a failover to a disaster recovery site, it is decided that the VMs need to be failed back to the original production site and that any changes made during the failover should be discarded. Which option should be used?
TESTED 28 Apr 2024
