You cannot disable the SyncMirror license if one or more mirrored volumes exist.

Which one of the following statements is true of storage appliance SnapVault backup?

Which statement is true of the cf forcetakover -d command?

What console message is a good indication that the storage appliance is ready to reinstate the cluster from a previous takeover?

For each Open Systems platform directory to be backed up to the SnapVault secondary storage system, you must execute _____ from the primary to secondary storage system.

Which two of the following NetApp storage appliances do not support the use of synchronous SnapMirror?

The snapvault update command is only available on the secondary system.

When Data ONTAP creates a weekly, nightly, or hourly snapshot, the value of n (as shown by the UNIX Is command) is adjusted for all the weekly, nightly, or hourly snapshots. The higher the value of n. the_________the snapshot.

Which two commands could be used if the cf giveback command foils? (Choose 2)

What command would you enter to restore the /vol/flexvol0/etc/rc file from a snapshot to the /vol/flexvol0/home directory?

Which native ONTAP feature allows an administrator to block a Windows user from writing files with the.crypto extension?

Alter issuing the vol split volO/plexO volNew command:

What are two logical network components of ONTAP? (Choose two.)

Which two modes support using SnapMirror over multiple paths?

The snapvault snap sched-x command can be used to:

Which one of the following keywords alone can be used to convert an asynchronous mirror to be synchornous?

The required hardware to add SyncMirror to an existing Clustered Failover system consists of:

If the local node has its FC HBA connected to switch Bank 1, it owns the disks connected to switch bank

It is the use of the -Lflag in the snapmirror initialize command and the subsequent successful level 0 transfer that causes the destination volume to become snaplocke?

Normally, before you split a SyncMirror volume, you ensure that both plexes are

Which system is recommended as a secondary system for SnapVault?

Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)

When using a Protection Manager policy to manage Open Systems SnapVault backups on a UNIX server, which three are valid objects to include in the data set? (Choose three.)

When you create a restricted volume to be used as the destination for SnapMirror data replication, which command allows you to check the size of the source and destination volumes?

The two copies of a SyncMirror volume are called_______. Each______is a physical copy of the same file system and consists of one or more RAID groups.

A volume is SnapMirrored hourly. You revert the volume using a snapshot that was created two days ago. Which command continues the relationship?

What predefined SVM role provides management for NDMP operations?

Which one of the following statements is not true of SnapLock volumes?

One method of configuring an interface for takeover is to enter ifconfig interface partner address at the command line. To make tins configuration persistent across reboots, you must enter tins information in the_____file for each appliance.

To remove a cluster setup, you must perform the following steps.

1. Type cf disable.

2. Unlicense cluster.

3. Remove partner entries for network interfaces from the /etc/rc file.

4. Halt and make sine the partner-sysid is blank.

5. Power down and remove the cluster interconnect card.

6. Perform steps 1-5 above on the partner node.

A True

B. False

SnapVaulr snapshots for SnapLock volumes are deleted automatically according to the retention count set in the SnapVault schedule?

Which method should an administrator use to make sure all data In a local tier cannot be read If the underlying device Is repurposed, returned, misplaced, or stolen?

What is the minimum number of HA pairs required for Epsilon to be automatically assigned?

Which two types of Restore does Cloud Backup allow? (Choose two.)

To restore a primary SnapVault qtree to the exact qtree location on the primary storage system (from which it was backed up), you must:

An administrator wants to scale out storage performance for real time read-intensive workloads across multiple controllers.

Which two NetApp ONTAP features accomplish this task? (Choose two.)

Identify the two commands that could be entered on a system with a SnapMirror source. (Choose two.)

Data ONTAP uses inodes in an active file system to reference__________________.

Which two of the following NetApp storage appliances do not support the use of synchronous SnapMirror?

The snapvault restore command is ran on the:

If an error message indicates that the cluster interconnect adapter itself is faulty, what is your corrective action?

Which three of the following configurations would increase data transfer rates for traditional volume SnapMirror?

Which statement describes the results of the snapmirror resync command?

Which NetApp solution enables block-level backup and restore from ONTAP to StorageGRID?

Which option of the snap restore command allows you to specify a different directory, as long as the directory already exists?

Which two products can be used to administer Cloud Volumes ONTAP? (Choose two.)

Which objects can be restored by a single SnapRestore command? (Choose three)

Data ONTAP uses inodes in an active file system to reference.

Which ONTAP feature will allow WORM and non-WORM volumes in the same aggregate?

After issuing the aggr split aggr0/plex0 aggrNew command ____________.

Which two supported methods would you use to restore data from a SnapVaultfor NetBackup Volume?

Which one of the following options will allow a snapmirror storage appliance to mirror from this system?

Refer to the exhibit.

An administrator creates a new qtree and an associated export policy. When the client tries to connect, they are denied.

What should the administrator do?

The OSSV agent on the primary system listens to TCP port 10000 for all SnapVault communications.

You want to create an automated test environment that performs a single file SnapRestore. Every time you run the procedure, however, SnapRestore prompts you to confirm your decision to revert the file. How can you automate this step?

When using SAN protocols, what is the maximum number of nodes that can be added to a four node cluster?

The snapvault snap sched -x command can be used to:

XML-files in /etc/stats/preset are used together with the sysstat command to customize the output.

Before enabling an active/active configuration, you should verify and compare the configuration of the nodes. Which tool can perform this task?

Which ONTAP feature will report real-time inactive data on NAS volumes?

The NearStore system is not the recommended secondary storage appliance for Open System SnapVault.

What NetApp tool includes Crafana dashboards to display ONTAP performance, capacity and hardware metrics?

What are two properties of the NVMe protocol? (Choose two.)

What is the format for snapvault schedule?

Which two protocols provide NAS access for home directories on an $VM? (Choose two.)

Exhibit:

To remove a cluster setup, you must perform the steps displayed in the exhibit.

Which one of the following is a recommended secondary system for SnapVault?

SnapMirror will automatically tiy to restart a transfer after_________.

A Ail initial transfer is interrupted

B. A scheduled incremental update is interrupted

C. A manual update is interrupted

D. A transfer interrupted by reboot

Protection Manager is an optional component of the Operations Manager that can be licensed and accessed from the NetApp Management Console (NMC).

An administrator Is troubleshooting failed cluster peering between three ONTAP clusters for cascaded SnapMirror replication. Cluster1 is peered to Cluster, cluster^ is peered to Cluster3.

Clusterl and Cluster3 do not have an available route to reach each other. Cluster2 can route to both Cluster1 and Cluster3 using dedicated and separate intercluster LIFs.

What ONTAP network component must be configured on Cluster2 to resolve this issue?

When you issue the snapmirror status command, to what does the "Lag" column refer?

You have quiesced a volume to stabilize the contents of a destination just prior to a snapshot. What is the next logical command that you would issue after the snapshot is complete?