Black Friday Doorbuster Deal - Flat 75% Off - Ends in 0d 00h 00m 00s - Coupon code: 75brite

ExamsBrite Dumps

NetApp Hardware Support Engineer Professional Exam Question and Answers

NetApp Hardware Support Engineer Professional Exam

Last Update Nov 22, 2026
Total Questions : 81

We are offering FREE NS0-094 Netapp exam questions. All you do is to just go and sign up. Give your details, prepare NS0-094 free exam questions and then go for complete pool of NetApp Hardware Support Engineer Professional Exam test questions that will help you more.

NS0-094 pdf

NS0-094 PDF

$27.5  $109.99
NS0-094 Engine

NS0-094 Testing Engine

$32.5  $129.99
NS0-094 PDF + Engine

NS0-094 PDF + Testing Engine

$42.5  $169.99
Questions 1

When you add a new disk to an ONTAP 9.1 system, you see an error that the disk “has raid label with version (16), which is not within the currently supported range (14-15).” What is one possible cause of this error?

Options:

A.  

The disk is a non-zeroed spare.

B.  

The disk firmware is too new for ONTAP software.

C.  

The disk needs to be assigned to the new system.

D.  

The disk was in a system with a newer version of ONTAP software

Discussion 0
Questions 2

In preparation for an upgrade to ONTAP 9.6P8 software, you have uploaded the ONTAP image 96P8_q_nodar_image.tgz onto your local web server with address 192.168.10.10.

Which is correct command syntax to download this image to the cluster image repository?

Options:

A.  

ClusterA:: > storage firmware download –node local –package-url

http://192.168.10.10/96P8_q_nodar_image.tgz

B.  

SP ClusterA–01 > cluster image package get –url

http://192.168.10.10/96P8_q_nodar_image.tgz

C.  

ClusterA:: > cluster image package get –url

http://192.168.10.10/96P8_q_nodar_image.tgz

D.  

ClusterA:: > cluster image package get –url

http: //netapp.com/ontap9/downloads/96P8_q_nodar_image.tgz

Discussion 0
Questions 3

After a panic, the customer asks you to explain the error “watchdog timeout.”

Which explanation would be appropriate?

Options:

A.  

An optional software that monitors system performance.

An overloaded system fails to reset the watchdog and watchdog induces a system panic.

B.  

An optional component included with Active IQ Unified Manager.

It notifies a user if watchdog fails to reach the storage system within a certain period.

C.  

A service that detects and recovers from computer malfunctions.

A hardware or software error prevents update of watchdog and it induces a system panic.

D.  

A service that monitors network activity and protects data.

A watchdog induces system panic to protect data if malicious activity is detected.

Discussion 0
Questions 4

An aggregate has experienced a multiple disk failure due to a failing I/O module (IOM). The module has been replaced and the aggregate is still failed.

What step can be taken to recover the aggregate?

Options:

A.  

Use diskcopy from maintenance mode.

B.  

Run wafliron from the boot_menu.

C.  

Unfail the drives from maintenance mode.

D.  

Unfail the drives in the order that they failed from the clustershell

Discussion 0
Questions 5

A storage administrator is troubleshooting a 4-node cluster, where one node is reporting “cluster port is down” alerts. The node has recently been recabled to new cluster switches. The cluster ping-cluster command shows communication failures between the affected node and its partners over the cluster network. All physical cables have been verified as properly seated and undamaged.

Which configuration is causing this problem?

Options:

A.  

The MTU size on the new cluster switches is mismatched with the nodes.

B.  

An incorrect gateway is defined for the management network.

C.  

An incorrect intercluster LIF is configured.

D.  

The SVM data LIFs are on the wrong ports.

Discussion 0
Questions 6

What are two valid commands that can be used to trigger an AutoSupport? (Choose two.)

Options:

A.  

:: > autosupport history show-upload-details –node < nodename >

B.  

:: > system node coredump upload –node < nodename >

C.  

:: > autosupport invoke –node < nodename > –type all

D.  

:: > autosupport invoke-core-upload –node < nodename >

Discussion 0
Questions 7

Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

Options:

A.  

AFF C190

B.  

FAS2750

C.  

AFF A220

D.  

FAS8200

Discussion 0
Questions 8

What are two valid options for uploading a core file from a node that is running ONTAP 9.12.1 software to NetApp for analysis? (Choose two.)

Options:

A.  

system node autosupport invoke -diagnostic

B.  

Download via CIFS and upload to upload.netapp.com.

C.  

Download via Service Processor Infrastructure (SPI) and upload to upload.netapp.com.

D.  

system node autosupport invoke-core-upload

Discussion 0
Questions 9

Which command can you use to confirm successful completion of an ONTAP upgrade?

Options:

A.  

system controller sp upgrade show

B.  

cluster image show-update-progress

C.  

job show –jobtype upgrade

D.  

system node upgrade-revert upgrade-task –node < nodename > –version < ontap Version >

Discussion 0
Questions 10

On an AFF A700 system, a SAS stack is connected to SAS ports 2a and 2b. The system has an additional 4-port SAS card in slot 9.

How should the cabling the corrected for best practices?

Options:

A.  

Use port 2a and 9a.

B.  

Use port 2a and 9b.

C.  

Use port 2a and 2c.

D.  

Use port 2b and 9d.

Discussion 0
Questions 11

Which two tools can be used to recover an inconsistent aggregate? (Choose two.)

Options:

A.  

file check

B.  

wafl_check

C.  

wafl snapiron

D.  

wafliron

Discussion 0
Questions 12

You have upgraded your cluster from ONTAP 9.5 software to ONTAP 9.7 software. After two days, you notice that the upgrade is causing issues. You decide to revert to ONTAP 9.5 software.

Which two actions do you need to complete before you revert? (Choose two.)

Options:

A.  

Revert from ONTAP 9.7 software to ONTAP 9.6 software and then to ONTAP 9.5 software.

B.  

Delete all Snapshot copies from the past two days.

C.  

Reinstall your boot media and install ONTAP 9.5 software.

D.  

Wipe your config and restore from backup.

Discussion 0
Questions 13

In which two sections of AutoSupport can you find information to analyze the following panic? (Choose two.)

Panic_Message: PCI Error NMI from device(s):ErrSrcID(CorrSrc(0xf00),UCorrSrc(0x18)), RPT(0,3,0):Qlogic FC 16G adapter in slot 1 on Controller

Options:

A.  

HA-RASTRACE.TGZ

B.  

ALL-COREDUMP.XML

C.  

SSRAM-LOG

D.  

PCI-HIERARCHY.XML

Discussion 0
Questions 14

You are upgrading your 6-node NetApp ONTAP cluster from ONTAP 9.9.1 to 9.16.1. As part of the ONTAP software upgrade process, you need to update the cluster switches. After you update the first switch, you receive the following AutoSupport message:

Exhibit — AutoSupport Alert

vifmgr: callhome.clus.net.degraded:alert:

Call home for CLUSTER NETWORK DEGRADED:

Large MTU Packet Loss - Ping failures detected

between Node1_clus1 (169.254.2.94) on Node1

and Node2_clus2 (169.254.248.67) on Node2.

All cluster ports and interfaces are in an up/up status.

What is causing this error?

Options:

A.  

ONTAP software is not at the same version on all nodes.

B.  

The RCF file has not been applied to all switches.

C.  

The ONTAP software version is not compatible with some of the controllers.

D.  

The cluster switches have different firmware versions.

Discussion 0
Questions 15

Your 2-node switchless cluster controllers are being upgraded. All cables are correctly connected. After the first controller is replaced, one of the cluster LIFs is not coming online.

You examine the port by running the following command:

Exhibit — Network Port Configuration

netapp::* > network port show -port e4a|e4e

-node netapp-02 -instance

Node: netapp-02

Port IPspace Broadcast Domain Link MTU Speed(Mbps) Health

e4a Cluster Cluster down 9000 1000/- -

e4e Cluster Cluster up 9000 auto/40000 healthy

Which parameter must you change to bring e4a up?

Options:

A.  

on the port, the -autonegotiate-admin field

B.  

on the broadcast-domain, the -mtu field

C.  

on the port, the -ignore-health-status field

D.  

on the broadcast-domain, the -ipspace field

Discussion 0
Questions 16

Your customer notices that their AFF A220 high-availability (HA) system is showing Single-Path HA.

How do you make the system into multipath HA?

Options:

A.  

0a and 0b on both controllers should be connected.

B.  

0a and 0c on both controllers should be connected.

C.  

0c and 0d on both controllers should be connected.

D.  

0a and 0d on both controllers should be connected

Discussion 0
Questions 17

Which two scenarios are common causes of the root volume needing root volume recovery? (Choose two.)

Options:

A.  

The root volume ran out of space.

B.  

The mainboard was replaced following a Non-Maskable Interrupt (NMI) panic.

C.  

Root volume migrate was performed.

D.  

The cluster configuration is out of sync on the volume.

Discussion 0
Questions 18

Which two statements are correct when describing L1 and L2 Watch Dog Resets (WDR)? (Choose two.)

Options:

A.  

L2 WDR requests creation of a core dump before reset.

B.  

L1 WDR is initiated after 0.5 seconds from the event.

C.  

L1 WDR performs a soft reset.

D.  

L2 WDR is initiated after 2 seconds from the event.

Discussion 0
Questions 19

You have a NetApp ONTAP cluster that is serving both SMB over 10Gbe and FC data. An application owner has started to complain about poor performance and asks you to research the issue. When looking through EMS messages, you see the following output:

Which defective component triggers the EMS message?

Options:

A.  

10Gbe module

B.  

fiber cable

C.  

32G FC module

D.  

adapter card in slot 2

Discussion 0
Questions 20

When you plan an ONTAP upgrade, which NetApp tool generates a detailed upgrade plan?

Options:

A.  

ONTAP System Manager

B.  

Active IQ Unified Manager

C.  

Upgrade Advisor

D.  

Active IQ Config Avisor

Discussion 0
Questions 21

Which two statements are true about an IOM 12 module? (Choose two.)

Options:

A.  

It has two SAS ports.

B.  

It has four SAS ports.

C.  

It does not have an Ethernet port for alternate control path (ACP).

D.  

It has an Ethernet port for alternate control path (ACP).

Discussion 0
Questions 22

While setting up a replication between two clusters, an administrator receives the following error message:

Failed to create cluster peering with 'Error: RPC to peer address 192.168.31.10 failed'.

What is the cause of this issue?

Options:

A.  

The cluster interconnect cables are faulty or have been disconnected.

B.  

The nodes are running incompatible versions of NetApp ONTAP software.

C.  

A license has expired or is invalid for one of the nodes.

D.  

A firewall is blocking necessary communication ports.

Discussion 0
Questions 23

You have upgraded your cluster from ONTAP 9.5 software to ONTAP 9.7 software. After the upgrade, you notice that the upgrade causes issues. You decide to revert to ONTAP 9.5 software.

Which revert step is allowed?

Options:

A.  

Revert to ONTAP 9.5 software with the netboot procedure.

B.  

Revert from ONTAP 9.7 software to ONTAP 9.5 software by using the boot backup procedure.

C.  

Revert directly from ONTAP 9.7 software to ONTAP 9.5 software.

D.  

Revert from ONTAP 9.7 software to ONTAP 8.6 software and then to ONTAP 9.5 software.

Discussion 0
Questions 24

You are using wafliron on an aggregate named homedir on a production system.

When is the data on homedir available?

Options:

A.  

when the administrator manually onlines the aggregate

B.  

when wafliron is started

C.  

after Phase 4 of wafliron is complete

D.  

after the mounting phase of wafliron is complete

Discussion 0