Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam
Last Update Sep 21, 2025
Total Questions : 178
We are offering FREE NCP-MCI-6.5 Nutanix exam questions. All you do is to just go and sign up. Give your details, prepare NCP-MCI-6.5 free exam questions and then go for complete pool of Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam test questions that will help you more.
When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host
failure?
An administrator wants to ensure that data in a container is stored in the most space efficient manner as quickly as possible after being written,
Which space efficiency too meets this requirement?
In the event of a disk failure, which process will immediately ad automatically scans Cassandra to find all data previously hosted on the failed disk, and all disks in that node?
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)
Which two types of granular RBAC does Nutanix provide for AHV hosts? (Choose two.)
An administrator needs to increase bandwidth available to the AHV host and to the CVM.
How should the administrator complete this task?
An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?
An administrator is not able to log into Prism Central by using a new Active Directory user account. After Logging with the local user, the administrator verified that Directory Services and Role Mapping setting are valid.
What is the most likely cause of this issue?
The administrator wants a container to be displayed and limited to 1TB in the hypervisor.
What advanced container setting must the administrator set?
Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)
A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?
An administrator needs to configure a new subnet on an AHV cluster and want to ensure that VMs will automatically be assigned an IP address at creation time.
Which type of network does the administrator need to create?
Where should an administrator unregister Prism Element from Prism Central?
An Administrator has been asked to deploy VMs using a specific image. The image has been configured with settings and applications that will be used by engineering to develop a new product by the company.
The image is not available on the desired cluster, but it is available in other cluster associated with Prism Central.
Why isno’t the image available?
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?
An administrator has set up a local web server accessible to the Nutanix clusters.
Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)
Refer to Exhibit:
An administrator needs to enable inline deduplication for a pre-existing storage container. When trying to enable deduplication on the storage container. this feature is grayed-out.
What is the reason for this behavior?
An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container
space for each application.
How should the administrator meet this requirement?
A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.
What is the result?
Which data savings technique utilizes stripes and parity calculation in a Nutanix cluster?
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
An administrator is tasked with configuring networking on an AHV cluster and needs to optimize for maximum single VM throughput.
Which bond mode should the administrator select?
An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.
Which initial step was missed during the post process cluster configuration?
An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.
But users are reporting disk latency.
What could cause the performance issues?
An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the cluster.
What is most likely thee cause of this issue?
An administrator has created several custom alert policies, which are applied to the same entities. Prism Central displays a message that a similar policy exists.
In what order of precedence are overlapping policies evaluated?
An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.
Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?
Refer to the exhibit.
Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)
An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.
What should the administrator do to perform an orderly shutdown of the CVM?
Refer to Exhibit:
An administrator wants to replace and old node with a node of newer generation in a 3-node cluster. The administrator has already chosen the appropriate node. But unable to remove it from the cluster.
Why is the Remove Host option not shown in the exhibit?
An administrator needs to report on any alerts generated by a Nutanix cluster that affected the cluster's availability over the past 10 days.
Which method should be used to locate these events?
Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?
How should an administrator enable secure access to Volumes using a password?
When creating a VM on an AHV cluster, how is the initial placement of the VM determined?
Administrator is creating a Windows 10 VM that will be used for a virtual desktop template. After creating the VM and booting to the ISO, the administrator is unable to install Windows and receives the following error.
What steps does the administrator need to take to install the OS?
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?
Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the
cluster?
An administrator is performing validation testing of a new-deploy cluster. During this test, the administrator disconnect each LAN interface from each of the nodes while pinging the hypervisor and guest VMs.
When the first interface is disconnected, pings continue as expected to the hypervisor, but pings stop responding from the guest. Pings continue when the interface is reconnected. When the second interface is disconnected, pings continue to both the hypervisor and guest VMs.
What could be the cause of this error?
An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?
An administrator needs to configure Prism to send encrypted messages to a set of recipients.
Which setting must be applied?
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)
When a configuring a syslog server in Prism Central, what two pieces information are required? (Choose two.)
A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.
Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?
An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:
Four blocks
One node per block
Will the administrator be able to accomplish these tasks?
A user running a Computer Aided Design (CAD) application is complaining about slow response time within the VM, particular when moving windows or rendering images.
Which VM metric will guide the administrator toward diagnosing the problem?
An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
TESTED 22 Sep 2025
