Your customer is using an HPE SimpliVity 380 Gen11 environment that is only managed with on-premises utilities.

How can this solution be integrated into the HPE GreenLake management platform to benefit from the HPE Private Cloud Business Edition features?

You are planning a data center networking solution for your customer.

The plan includes:

A VXLAN/EVPN solution

Aruba CX8325H as TOR switches

Aruba CX8320 as core switches

How should you configure the ports from the TOR switches to the core switches?

Your customer wants to implement a disaster recovery solution for their virtualization workload. They also want to implement a protection method that will protect the workload in case of a site failure.

Their existing environment includes the following configurations:

All ESXi systems are located in the same datacenter

Virtual machines are protected by an HA cluster

Some of the VMs are protected with Fault Tolerance

HPE Synergy 480 Gen11 is the compute platform

HPE Alletra Storage MP B10000 array for storage

Orchestrated failover for all VMs using VMware tools

The customer plans to replicate the same setup at the second site. The total number of virtual machines that must be protected is 200. Your customer also expects an RPO of 0.

Which component or configuration is a necessary part of a solution that will meet all customer requirements?

Your customer wants to implement an HPE SimpliVity stretched cluster spanning two sites to improve availability.

You are reviewing an HPE SimpliVity proposal that consists of the following components:

12 HPE SimpliVity 380 Gen11 nodes, 8 for the primary site and 4 for the remote site, all of which have 2 CPUs, 16 cores each

12 HPE OneView Advanced licenses

2 HPE Alletra Storage MP B10000, 1 for the primary site and 1 for the remote site

384 core VMware vSphere Standard subscriptions

Two pairs of ArubaOS-CX 8325 switches

Which statement about this proposal is true?

You have proposed that your customer adopts HPE VM Essentials as an alternative hypervisor, but they still want to utilize their existing HPE Synergy 480 Gen10/Plus for existing vSphere workloads.

How can your customer manage both environments from a single management platform?

Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.

Currently, they have 30 HPE ProLiant 380 Gen10 Plus deployed with ESXi 7.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra and HPE Primera arrays.

Which statement about the configuration and customer requirements is correct?

One of your customers is planning to refresh their current campus wired and wireless networking equipment. They are currently moving to a pay-per-use model for their whole IT solution.

They are wondering if there is a possibility to get new networking equipment in this model without capital expenses. They are also interested in moving LAN management to an external service provider. You are presenting HPE GreenLake for Aruba Networking.

Which statement is true for this customer situation?

Your customer is requesting an update to their data protection plan, to include a copy of several volumes to two different locations. The current environment is utilizing HPE Alletra Storage MP B10000 systems.

What is true about this solution?

A customer requested a quote for a 64Gb Fibre Channel system between two data centers with a distance of 95 KM / 60 MI between the locations, with a requirement for 14 F-ports on each switch.

Refer to exhibit

Which statement is true about the given configuration?

Your customer is planning to deploy several HPE ProLiant DL360 Gen11 servers with Windows Server 2025, for a bare-metal use case with no hypervisors.

The customer is concerned about the time it takes to scan and deploy the servers for new firmware and driver updates.

What HPE management tool can be used in this scenario to apply firmware updates to servers, with direct integration to HPE repositories?

Your customer’s environment includes HPE Private Cloud Business Edition with deployed HPE SimpliVity 380 Gen11 nodes.

They have asked you to upgrade the vSphere, OmniStack, and firmware components of the environment in a fully controlled operation.

Which tool should you use?

Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use as a Peer Persistence enabling platform for their critical workloads.

Which statement about these platforms and their benefits is true for Peer Persistence?

You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:

Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported

Each node should have access to shared storage from HPE Alletra Storage MP B10000

All virtual machines should be protected against host failure

All virtual machines with vGPU must be protected with Fault Tolerance

All compute nodes should boot from drives located in the D3940 Storage Modules protected with RAID 1

All frames should be managed as one logical enclosure to simplify management

All compute nodes should support two network ports with the maximum Ethernet connectivity speed

You are reviewing a proposal that you must verify. The proposal contains:

3 HPE Synergy 12000 frames

2 HPE Synergy Composer2 modules

4 HPE Virtual Connect SE 100Gb F32 Modules for Synergy

4 HPE Synergy 50Gb Interconnect Link Modules

3 HPE Synergy D3940 Storage Modules, each with 20 SSD drives

1152 core vSphere Enterprise Plus subscriptions

36 HPE Synergy 480 Gen11 compute nodes

Each SY480 Gen11 is configured with:

A single Platinum CPU with 32 cores

HPE Synergy 6820C 25/50Gb Converged Network Adapter

HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter

HPE MR416i-o Gen11 12G SAS Mezzanine Controller

Which two statements are true regarding the proposal? (Select two.)

Your customer has HPE Superdome Flex running VMware ESXi 8.x. Current setup consists of:

One Rack Management Controller

One HPE Superdome Flex Base chassis

One HPE Superdome Flex Expansion chassis

The existing complex has a single nPartition. The customer plans to expand the existing nPartition with two additional expansion chassis.

Which statement about the planned expansion is true?

Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage.

They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure. The servers will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.

Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide a lossless fabric for RoCE traffic.

What is the correct environmental or design change that will meet the customer’s new requirement?