Weekend Sale Special 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: exams65

Aruba Certified Campus Access Associate Exam Question and Answers

Aruba Certified Campus Access Associate Exam

Last Update May 10, 2024
Total Questions : 60

We are offering FREE HPE6-A85 HP exam questions. All you do is to just go and sign up. Give your details, prepare HPE6-A85 free exam questions and then go for complete pool of Aruba Certified Campus Access Associate Exam test questions that will help you more.

HPE6-A85 pdf

HPE6-A85 PDF

$35  $99.99
HPE6-A85 Engine

HPE6-A85 Testing Engine

$42  $119.99
HPE6-A85 PDF + Engine

HPE6-A85 PDF + Testing Engine

$56  $159.99
Questions 1

What is indicated by a solid amber radio status LED on an Aruba AP?

Options:

A.  

Not enough PoE is provided from the switch to power both radios of the AP

B.  

The radio is working in mesh mode

C.  

The radio is working the 5 GHz band only.

D.  

The radio is enabled in monitor or spectrum analysis mode

Discussion 0
Questions 2

When would you bond multiple 20MHz wide 802.11 channels?

Options:

A.  

To decrease the Signal to Noise Ratio (SNR)

B.  

To increase throughput between the client and AP

C.  

To provision highly available AP groups

D.  

To utilize high gain omni-directional antennas

Discussion 0
Questions 3

A network technician is using Aruba Central to troubleshoot network issues Which dashboard can be used to view and acknowledge issues when beginning the troubleshooting process?

Options:

A.  

the Alerts and Events dashboard

B.  

the Audit Trail dashboard

C.  

the Reports dashboard

D.  

the Tools dashboard

Discussion 0
Questions 4

Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnected with two cables between ports 1/1/1 and 1/1/2 All four ports have "no shutdown" and "no routing" commands

How will STP forward or discard traffic on these ports?

Options:

A.  

The switch with the lower MAC address will forward on both ports, while the switch with the higher MAC address will forward on both ports

B.  

The switch with the lower MAC address will forward on both ports, while the switch with the higher MAC address will discard on one port

C.  

The switch with the lower MAC address will discard on one port, while the switch with the higher MAC address will forward on both ports

D.  

The switch with the lower MAC address will discard on one port, while the switch with the higher MAC address will discard on one port

Discussion 0
Questions 5

What is the recommended VSF topology? (Select two.)

Options:

A.  

Star

B.  

Daisy chain plus MAD

C.  

Full mesh

D.  

Full mesh plus MAD

E.  

Ring

Discussion 0
Questions 6

Which statement is correct when comparing 5 GHz and 6 GHz channels with identical channel widths?

Options:

A.  

5 GHz channels travel the same distances and provide different throughputs to clients compared to 6 GHz channels

B.  

5 GHz channels travel different distances and provide different throughputs to clients compared to 6 GHz channels

C.  

5 GHz channels travel the same distances and provide the same throughputs to clients compared to 6 GHz channels

D.  

5 GHz channels travel different distances and provide the same throughputs to clients compared to 6 GHz channels

Discussion 0
Questions 7

Which Protocol Data Unit (PDU) represents the data link layer PDU?

Options:

A.  

PDU1 - Signal

B.  

PDU2 - Frame

C.  

PDU3 - Packet

D.  

PDU4 - Segment

Discussion 0
Questions 8

You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely rather than on-site You have a colleague installing the switch The colleague has provided you with a remote console session to configure the edge switch You have been asked to configure a link aggregation going back to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure the switch and 1Q uplink with these guidelines

1. Add VLAN 20 to the local VLAN database with name Mgmt

2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using LACP mode active for the uplink

4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON.

Which configuration script will achieve the task?

Options:

A.  

Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut

B.  

Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacp

mode active interface 1/1/51.1/1/52 no shut

C.  

Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut

D.  

conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1/51.1/1/52 no shut

Discussion 0
Questions 9

What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

Options:

A.  

ip-route 10.2.10.0/24 172.16.1.1

B.  

ip route 10.2.10.0.255.255.255.0 172.16.1.1 description aruba

C.  

ip route 10.2.10.0/24.172.16.11

D.  

ip route-static 10.2 10.0.255.255.255.0 172.16.1.1

Discussion 0
Questions 10

Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

Options:

A.  

iP default-gateway 10.4.5.1

B.  

ip route 0 0 0.070 10.4 5.1 vrf mgmt

C.  

ip route 0.0 0 0/0 10.4.5.1

D.  

default-gateway 10.4.5.1

Discussion 0
Questions 11

A network administrator with existing IAP-315 access points is interested in Aruba Central and needs to know which license is required for specific features Please match the required license per feature (Matches may be used more than once.)

Options:

Discussion 0
Questions 12

What does the status of "ALFOE" mean when checking LACP with "show lacp interfaces'"?

Options:

A.  

The interface on the local switch is configured as static-LAG

B.  

LACP is not configured on the peer side

C.  

LACP is in a synchronizing process

D.  

LACP is working fine with no problems

Discussion 0
Questions 13

You need to configure wireless access for several classes of loT devices, some of which operate only with 802 11b. Each class must have a unique PSK and will require a different security policy applied as a role There will be 15-20 different classes of devices and performance should be optimized

Which option fulfills these requirements''

Options:

A.  

Single SSID with MPSK for each loT class using 5 GHz and 6 GHz bands

B.  

Single SSID with MPSK for each loT class using 2.4GHz and 5 GHz bands

C.  

Individual SSIDs with unique PSK for each loT class, using 5GHz and 6 GHz bands

D.  

Individual SSIDs with unique PSK for each loT class, using 2.4GHZ and 5GHz band

Discussion 0
Questions 14

Which authentication does Aruba's Captive Portal use?

Options:

A.  

Layer 3 authentication

B.  

MAC authentication

C.  

802.1x authentication

D.  

Layer 2 authentication

Discussion 0
Questions 15

What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs. and other PoE devices?

Options:

A.  

Enable Quick PoE on the switch modules

B.  

Enable profiling for device provisioning

C.  

Configure PoE power management to Class-based Mode

D.  

Configure PoE power management to Dynamic Mode

Discussion 0
Questions 16

Which statement about manual switch provisioning with Aruba Central is correct?

Options:

A.  

Manual provisioning does not require DHCP and requires DNS

B.  

Manual provisioning does not require DHCP and does not require DNS

C.  

Manual provisioning requires DHCP and does not require DNS

D.  

Manual provisioning requires DHCP and requires DNS

Discussion 0
Questions 17

What are the main characteristics of the 6 GHz band?

Options:

A.  

Less RF signal is absorb by objects in a 6 GHz WLAN.

B.  

In North America, the 6 GHz band offers more 80 MHz channels than there are 40 MHz channels in the 5 GHz band.

C.  

The 6 GHz band is fully backward compatible with the existing bands.

D.  

Low Power Devices are allowed for indoor and outdoor usage.

Discussion 0
Questions 18

A network technician is troubleshooting one new AP at a branch office that will not receive Its configuration from Aruba Central The other APs at the branch are working as expected The output of the 'show ap debug cloud-server command' shows that the "cloud conflg received" Is FALSE.

After confirming the new AP has internet access, what would you check next?

Options:

A.  

Disable and enable activate to trigger provisioning refresh

B.  

Verify the AP can ping the device on arubanetworks.com

C.  

Verify the AP has a license assigned

D.  

Disable and enable Aruba Central to trigger configuration refresh

Discussion 0