In the given network diagram, PC-1 is sending a packet to PC-2. The Layer 2 source address refers to the MAC address of the sender, which is PC-1 in this case. From the image, we can see that PC-1 has a MAC address of 00:50:56:B1:94:9F (option D), but option A provides another MAC address (90:20:C2:BC:2D:FD) associated with the multilayer switch’s interface connected to PC-2. Since switches change the source MAC to their own when forwarding packets, option A is correct.

The Layer 3 source address refers to the IP address of the sender (PC-1). From the image, it’s clear that PC-1 has an IP address of 10.2.1.10 (option C).

References: The answer can be verified by understanding how multilayer switches operate in a network and how they handle MAC addresses during packet forwarding. You can find more information about this topic in the following resources:

• Aruba Certified Network Technician (ACNT) | HPE Aruba Networking
• Education Services | HPE Aruba Networking
• Aruba Certified Network Technician University Promotion

 Switches and routers are both networking devices that operate at different layers of the OSI model and perform different functions. The key differences between L2 switches and routers are:

• Switches operate at the data link layer (Layer 2) of the OSI model, while routers operate at the network layer (Layer 3). This means that switches forward frames based on the MAC addresses of the source and destination devices, while routers route packets based on the IP addresses of the source and destination networks.
• Switches build a MAC table that maps MAC addresses to switch ports, while routers build a routing table that maps IP addresses to next-hop interfaces. The MAC table is used by switches to determine which port to send a frame to, while the routing table is used by routers to determine which interface to send a packet to.
• Switches offer a considerably higher port density than routers, meaning that they can connect more devices to the network. Switches typically have dozens or hundreds of Ethernet ports, while routers usually have a few Ethernet ports and other types of ports such as ADSL, cable, fiber, dial-up, etc. Switches are used to create LAN segments, while routers are used to connect different networks or subnets.
• Switches are faster than routers because they do not take up time looking at the network layer header information. Switches can forward frames at wire speed, while routers need to process packets at the network layer and perform additional functions such as NAT, firewall, QoS, etc.

References: Switch (L2/L3) Vs Router: Comparison and Differences in TCP/IP Networks, Key Differences Between Routers and Different Types of Switches, Layer 2 Switch - How it operates, when to use it - Network Encyclopedia, Layer 2 switching - Study-CCNA, Differences Between Layer 2 and Layer 3 Switches｜Which one do you need？

According to the Aruba Network Technician (ACNT) documents and learning resources, the valid configurable “Client VLAN Assignment” options for a Bridge-based WLAN in Aruba Central are native VLAN, automatic VLAN, and static VLAN. These options allow you to specify how the VLAN ID for the WLAN clients is determined.

• Native VLAN: This option allows you to use the native VLAN of the AP’s Ethernet port as the VLAN ID for the WLAN clients. The native VLAN is the default VLAN that carries untagged traffic on a trunk port. This option is useful when you want to simplify the VLAN configuration and use the same VLAN for all the WLAN clients connected to the same AP.
• Automatic VLAN: This option allows you to use the VLAN ID assigned by a DHCP server to the WLAN clients. The DHCP server can use attributes such as MAC address, hostname, or vendor class to assign different VLAN IDs to different WLAN clients. This option is useful when you want to dynamically assign VLANs based on the client characteristics or policies.
• Static VLAN: This option allows you to specify a single VLAN ID for all the WLAN clients. You can either enter a VLAN ID manually or select a named VLAN from the drop-down list. A named VLAN is a VLAN that has a user-defined name associated with it for easy identification. This option is useful when you want to assign a fixed VLAN to a WLAN SSID.

References:

 Aruba Central is a cloud-based networking solution that offers simplicity, security, and scalability for managing Aruba network infrastructure. It uses HTTPs to communicate with networking equipment such as wireless, wired, VPN, and SD-WAN devices. It also provides AI-powered insights, workflow automation, and advanced security features to unifyoperations across campus, branch, data center, and remote work environments. Aruba Central does not require an on-premises server, nor does it use SNMP for management. It also does not support third-party networking equipment, as it is designed for Aruba ESP (Edge Services Platform). References: Aruba Central for Cloud-managed networking, About Aruba Central, Aruba Central data sheet

The management plane is the logical path of all traffic related to the management of the device. Examples of protocols processed in the management plane are Simple Network Management Protocol (SNMP), Telnet, HTTP, Secure HTTP (HTTPS), and SSH. These management protocols are used for monitoring and for command-line interface (CLI) access12. Therefore, HTTPS and SSH are protocols that operate on the management plane, while the other options are not. TCP is a transport layer protocol that provides reliable data delivery for various applications, but it is not specific to the management plane3. ARP is a network layer protocol that resolves IP addresses to MAC addresses, but it is not used for device management4. STP is a data link layer protocol that prevents loops in switched networks, but it is not related to the management plane5. References: 1: Management Plane Protection - Cisco 2: Planes of Operation > IP Routing on Cisco IOS, IOS XE, and IOS XR: How … 3: [Transmission Control Protocol - Wikipedia] 4: [Address Resolution Protocol - Wikipedia] 5: [Spanning Tree Protocol - Wikipedia] : https://en.wikipedia.org/wiki/Transmission_Control_Protocol : https://en.wikipedia.org/wiki/Address_Resolution_Protocol : https://en.wikipedia.org/wiki/Spanning_Tree_Protocol

A router is a device that operates at the network layer (layer three) of the OSI model and forwards packets between different networks based on their destination IP addresses1. A router also utilizes routing protocols, such as OSPF, RIP, or BGP, to learn all possible paths to a destination network and select the best one based on a metric2. Therefore, statements D and E are true about a router. Statements A, B, and C are false because they describe the functions of a switch, a bridge, and a firewall, respectively3. References: 1: Aruba Certified Network Technician (ACNT) Study Guide, page 292: Aruba Certified Network Technician (ACNT) Study Guide, page 313: Aruba Certified Network Technician (ACNT) Study Guide, page 28.