What is the maximum number of SSDs supported by a 2-node HPE Alletra 9000 system running Alletra OS 9.5?

The customer is performing an initial setup of an HPE Alletra 6000 system. Which user interface can you use to define initiators when configuring an HPE Alletra 6000 system?

Match the HPE converged Strategy principle with its function

You are advising a customer on a new backup strategy to deploy HPE StoreOnce.

What should you recommend to ensure the best storage utilization and performance?

What advantage does the Unified API that is part of HPE’s composable strategy provide?

After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC)

configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?

What is used to migrate data between nodes in an HPE StoreVirtual VSA environment?

Which SAN topology will result in E Port type at the SAN switch?

You'fe starting to design a ToR network for a customer that will use it for JSCSI or NVMe-oF-TCP storage. The design requires a switch with a maximum of 48 ports and 10/25GB speed. What is the best recommended switch for this scenario?

Which statement regarding the deduplication process on HPE StoreOnce is a true?

How many simultaneous disk failures can an HPE Alletra 6000 tolerate?

A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.

Which single HPE storage platform can you present to the customer that will meet both of their needs?

What are two advantages of HPE Recovery Manager Central? (Select two.)

Which HPE storage array offers the ability to survive any three disks failing at the same time?

Which of the following options is a benefit of the Persistent Ports feature?

A customer need to update the local sever at each of their branches keep up with the

increasing demand for High-performance storage. The customer cannot afford to move to

SAN at each state. Which HPE storage technology can increase performance for this

customer?

Your customer would like to improve the security of their backups with HPE StoreOnce data-in-flight encryption. Which statement is true for this feature?

A customer has a large deployment of HPE Synergy compute modules. HPE 3PAR StoreServ arrays, and HPE StoreOnce system in a single data center. They are concerned about the risk of data loss due to site disaster and seeks cost-effective offsite Disaster Recovery protection without the need to deploy a secondary site.

Which HPE solution should you recommend?

How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

Exhibit:

The customer has upgraded the first of their two HPE StoreServ 8200to the latest inform OS

version to take the advantage of the compression feature .You have been asked to design the

storage configuration to support oracle database volume to utilize HPE 3PAR compression .

Based on the analysis of the array .what would be your suggestion to implement the

requested change?

Which product can you recommend as a SAN component for refreshing an iSCSI-based SAN that supports wire speed Ethernet, comes in a 1U fabric form with two independent switches, and supports lOOGbE.

Which management interface uses four basic commands (Create ,read, update ad delete )to

enable administrators to define ad radically simply management processes?

A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances.

What do you need to consider when designing the new VSA instances?

Which NVMe transport technology is utilizing RDMA and DCB for the lossless fabric?

How does HPE GreenLake for Block Storage perform VV and LD ownership?

What information should be collected for creating a proper host entry within Data Ops Manager when using an HPE Alletta MP solution?

What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?

A customer need a backup solution to their virtualized environment .The backup solution

must be agentless ,hypervise independent and integrated with HPE storage solutions. The

solution must support Nimble snapshot and replication management. What products meets

the customer requirement?

Match the data access type in a SAN fabric to the correct description.

Which of the following statements is true regarding your customer's support status when moving from an HPE StoreOnce backup appliance to HPE GreenLake Backup and Recovery?

Select the correct statement regarding the interoperability of different drive interfaces.

How can an IT administrator access the HPE Alletra dHCI Stack Manager for managing their HPE Alletra dHCI solution?

During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE

SN6000B switches. Which port mode must be set enable communication between the

switches?

Your customer would like to implement a data protection technology that will offer the lowest possible RPO and will protect from entire array failure. Which technology should the be used?

What are the benefits of the Persistent Cache feature?

A Company using an existing 1GB ISCSI storage array is experiencing storage access

performance issue. They are interested in deploying HPE 3PAR Storeserv with 16GB /S FC end to-end to improve the performance to the minimal changes to the environment. The existing environment consists of these HPE products

* HPE C7000 Blade system platinum blade enclosure with HP virtual connect Flex 10 interconnect modules.

* Configuration of HPE Proliant Gen8 and Gen9 blade servers

* HPE 2920 Switches

Which HPE products must be included to support new HPE 3PAR Storeserv?(Select two)

Which statement regarding controller nodes on the HPE Alletra 9000 series is true?

You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.

Which statements is correct when discussing the IRF limits for this configuration?

A customer needs to store a large amount of unstructured data that must be queried quickly.

Which type of storage meets the customer’s needs?

A customer has a SAN infrastructure with an HPE C-Class blade enclosure, and a mix of ProLiant G7, Gen8 and Gen9 servers. They require a new storage platform.

How can you confirm the new storage array will be supported in the existing environment?

The customer is deploying a new HPE AUetra dHCI Storage. Select a correct statement related to HPE Storage Setup Manager:

To improve the deduplication ratio of their MS SQL VMs farm hosted on an HPE Alletra 9000, what steps can you take?

A customer is purchasing an HPE MSA 2050 for a branch office. They will use it for critical data services. The customer is concerned that 64 snapshots will not be adequate as they grow.

What can be added to the array to address the customer’s concerns?

Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)

Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)

Refer to the exhibit.

You are configuring a new HPE array and verifying properties of a set of volumes.

Which RAID level is used on the VMwareDatastores-GF volume?

A customer has a Nimble HF40 and needs to create a support ticket.

Click the option in the InfoSight portal where the customer can perform this task.

What is the purpose of WWN in FC SAN? (Choose two.)

Select the correct initiation option for each HPE Primera function.

You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.

Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)

Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)

You want to deploy Recovery Manager Central to a customer environment.

How can you accomplish this? (Choose two.)

A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify achieved savings from deduplication and compression in the customer solution?

You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.

Which HPE tool can you use on the host server to make the integration easier?

You have proposed that a customer replace their legacy SAN switches with new ?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.

What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)

A customer is implementing a new high performance database environment.

What type of storage should you recommend?

Refer to the exhibit.

You create two snapshots of a thin provisioned base volume in an HPE Primera. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.

Place the actions on the left into the order they are taken on the right.

A customer wants to make a full copy replica of a database to use for performance testing.

Which technology should they use to create the copy?

A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.

What is the latest tape drive technology that will provide backward compatibility?

You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.

They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.

Which storage connectivity components should you recommend?

Match each HPE storage solution to its use case.

What is the typical protocol used to access data from object storage?

Refer to the exhibit.

A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.

The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.

Which addition to the Primera should you recommend?

A)

B)

C)

D)

A small company has recently purchased an MSA and two B-series SN3000B switches. In an effort save money, they installed the solution themselves. They call you complaining they can now see the multiple volumes on the MSA after creating just a single volume.

What should you advise them to do?

A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected

via FC and the rest are connected via a WAN.

Which backup target type should you recommend?

You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more

than 500GB.

Which technology should you recommend?

A customer needs a centralized solution for storing departmental data to be accessed by Windows-based laptops and other personal devices.

Which solution should you recommend?

You need to deploy a Recovery Manager Central appliance and integrate it with a customer’s 3PAR system.

Which information must be collected from the customer in order to proceed with the installer? (Choose two.)

A customer is deploying a new StoreOnce VSA solution.

How can the necessary storage capacity be added to the VSA? (Choose two.)

You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.

Click the appropriate option where the RAID can be selected.

A customer wants to implement a new storage network, but wants to retain the ability to connect with legacy fiber channel-based components.

Drag the appropriate component to each box on the diagram to design a new storage network.

Which tool is used to determine current compaction ratios on Primera arrays?

A customer implemented the HPE StoreEver MSL6480 Tape Library.

Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?

Which protocol can be used for accessing StoreOnce VTL target from Veeam?

Match the MSA architecture components with their descriptions.

You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.

Which technology can be configured at 3PAR to support forwarding events from the array to the customer’s monitoring application?

A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.

Which HPE storage solution should you recommend?

You are designing an HPE MSA iSCSI for a customer.

Which components are typically part of the solution? (Choose two.)

You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.

Click the option where you can create a group of VMware hypervisors for volumes provisioning.

Match each address with the associated address type.

You are asked to review an installation plan for a new Primera storage array. The array will go into an existing environment that has been in production for over 4 years. It includes:

C7000s with Gen8 blades

8Gb Brocade switches

a 3PAR 7400

an MSA that is used as a backup target

What should you use to find appropriate installation and planning guides?

A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase-Т adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new

adapter is not configurable.

What is the most likely reason for this issue?

You are designing a new HPE 3PAR StoreServ solution.

Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.

Click the relevant menu option where the front panel of the head shelf can be visualized.