All four options can be used as conditions by the iMaster NCE-Campus intelligent policy engine. Huawei describes this capability through a 5W1H-based policy model. “Who” represents the user identity, user group, or role. “Where” represents the access location, including the site, region, device group, device, SSID, or IP address. “How” represents the access mode, such as wired or wireless access and the authentication method used. “What” represents the terminal type or device attributes, including PCs and mobile operating systems.

The platform can combine these conditions rather than evaluating them independently. For example, a finance employee using a corporate laptop through wired 802.1X access at headquarters can receive different permissions from the same employee connecting through a personal mobile device at a branch. The authorization result can include a VLAN, ACL, security group, bandwidth limit, DSCP value, application policy, or URL-filtering rule.

This multidimensional evaluation enables context-aware, fine-grained access control. Therefore, A, B, C, and D are all correct.

==================

Huawei SD-WAN provides all four technologies. Per-flow load balancing distributes separate application flows among multiple links that have the same priority and satisfy the required SLA. Per-packet load balancing can transmit packets from one flow across multiple eligible links, improving aggregate bandwidth utilization for large file transfers, backups, and replication.

Multi-fed and selective receiving duplicates critical traffic across different links. The receiving device selects valid packets, removes duplicates, and preserves packet order. Packet loss or failure on one path therefore does not interrupt the service, enabling zero-millisecond link switchover in applicable deployments.

A-FEC dynamically generates redundant packets and adjusts the redundancy ratio according to measured packet loss. The receiving device reconstructs lost packets, reducing video freezing and voice-quality deterioration. Huawei describes both adaptive FEC and multi-fed selective receiving as WAN-optimization mechanisms for key traffic.

Intelligent traffic steering selects links according to application identity, quality, bandwidth, priority, and load. Therefore, A, B, C, and D are all correct.

==================

The capabilities introduced with Wi-Fi 7 are 4096-QAM and channel bandwidth of up to 320 MHz. Wi-Fi 7, based on IEEE 802.11be Extremely High Throughput, doubles the maximum channel width available under Wi-Fi 6 and Wi-Fi 6E from 160 MHz to 320 MHz where sufficient regulatory spectrum is available. It also introduces 4096-QAM, encoding 12 bits per modulation symbol compared with 10 bits for Wi-Fi 6’s 1024-QAM. This can increase peak spectral efficiency when the signal-to-noise ratio is sufficiently high.

The other options were available before Wi-Fi 7. Support for up to eight spatial streams existed in earlier IEEE 802.11 generations, and MU-MIMO was already supported before Wi-Fi 7, with major uplink and downlink enhancements delivered by Wi-Fi 6. The 6 GHz band was commercially introduced through Wi-Fi 6E. Huawei’s material specifically describes Wi-Fi 6E as extending Wi-Fi 6 into the 6 GHz spectrum. Wi-Fi 7 continues using 6 GHz but did not introduce it. Therefore, only A and C are correct.

==================

All four options are recognized terminal identification methods. MAC OUI examines the first three bytes of a device’s MAC address to determine its manufacturer, although it generally cannot identify the exact model or operating system. DHCP option identification analyzes fields such as DHCP options 12, 55, and 60, which can reveal the hostname, parameter-request list, vendor class, and other terminal characteristics. SNMP query is an active identification method that retrieves device details from relevant MIB objects and is particularly useful for printers, network devices, and other SNMP-capable equipment.

Nmap is also an active scanning method. It analyzes open ports, service responses, protocol behavior, and operating-system fingerprints to estimate a terminal’s device type and OS. Huawei distinguishes information-reporting methods from proactive scanning methods: MAC OUI and DHCP options generally use information observed in traffic, whereas SNMP and Nmap actively query or scan the endpoint. iMaster NCE-Campus can correlate multiple fingerprints to improve identification accuracy and automatically apply terminal-specific access policies.

==================

AR routers support registration query center–based deployment, email-based deployment, and DHCP Option 148–based deployment. In registration query center deployment, the router obtains basic network connectivity, resolves or contacts Huawei’s registration service, retrieves the address and port of iMaster NCE, and then initiates registration. Huawei identifies AR routers, firewalls, switches, and APs as applicable devices for this method.

Email-based deployment is a major SD-WAN ZTP method for AR routers operating as CPEs. An administrator creates the site and ZTP configuration on iMaster NCE and sends a deployment URL to the onsite engineer. After the URL is opened and the parameters are written to the router, the device connects to the WAN and automatically registers with the controller.

DHCP Option 148 can provide the controller’s southbound IP address and port number to an IPv4 AR router, enabling automatic registration. Barcode scanning through the CloudCampus APP is specifically presented as an AP onboarding method, not an AR-router deployment method. Therefore, A, C, and D are correct.

The AR5710-S8T1XWE-NRGL supports all four listed 5G-Advanced capabilities. Support for 3GPP Release 16 enables enhanced 5G New Radio functions and provides the standards foundation for improved mobile-WAN capacity, reliability, and service performance.

Carrier aggregation combines multiple component carriers to increase available throughput. Downlink 3CC allows three component carriers to be aggregated for received traffic, while uplink 2CC combines two carriers for transmitted traffic. This is valuable for high-bandwidth branch access, video backhaul, and mobile private-network scenarios.

Support for eight APNs permits multiple logically separated mobile services or provider profiles to be configured. Different APNs can represent enterprise services, management traffic, production systems, backup connectivity, or isolated customer networks. Global-frequency-band support improves deployment flexibility across countries and carrier networks, subject to local spectrum regulation and the supported modem variant.

Huawei SD-WAN can use 5G as a primary, secondary, or bypass link and supports combinations such as dual 5G and 5G plus wired connectivity for service assurance. Therefore, NR Release 16, carrier aggregation, eight APNs, and global frequency bands are all supported.

==================

In the product and course version covered by this examination, SD-WAN virtual CPEs can be deployed on AWS, Alibaba Cloud, and Microsoft Azure. A vCPE such as Huawei AR1000V provides SD-WAN routing functions as a virtual machine within a supported public-cloud infrastructure. It can connect enterprise branches to workloads hosted in the cloud and bring the cloud environment under the same controller-based management and policy-orchestration framework as physical CPEs.

This deployment provides one-hop cloud access, avoids unnecessarily routing cloud-bound traffic through a remote headquarters, and enables unified overlay networking between branches, data centers, and cloud virtual networks. Huawei states that the AR1000V virtual SD-WAN router can be deployed in public clouds to implement branch-to-cloud interconnection and unified policy orchestration. Huawei also describes flexible deployment of physical CPEs and vCPEs for cloud-access and PoP-based acceleration scenarios.

Huawei Cloud is not included in the supported public-cloud list represented by this specific H19-404 question. Product compatibility is version-dependent, so the correct examination answer is A, B, and C.

==================