You are deploying a WLAN with the access points configured for 10 mW of output power on the 2.4 GHz radios and 20 mW of output power on the 5GHz radios. Some semi-directional antennas are also in use. What kind of deployment is described?

802. 11ax (HE) introduces Resource Units that can be used to allow communications with multiple devices at the same time, on the same channel, in the same BSS. What feature of 802.1 lax provides this functionality?

A dual-band 802.11ac AP must be powered by PoE. As a class 4 device, what power level should be received at the AP?

You manage a WLAN with 100 802.11ac access points. All access points are configured to use 80 MHz channels. In a particular BSS, only 40 MHz communications are seen. What is the likely cause of this behavior?

What terms accurately complete the following sentence?

The IEEE 802.11-2016 standard specifies mandatory support of the _______________ cipher suite for Robust Security Network Associations, and optional use of the ________________ cipher suite, which is designed for use with pre-RSNA hardware and is deprecated.

An RF signal sometimes bends as it passes through some material other than free space. What is the term that describes this behavior?

What primary metric of scanning can stations use to select the best AP for connectivity to the desired BSS?

What wireless networking term describes the increase of RF energy in an intentional direction with the use of an antenna?

You are installing an AP to be used by 27 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?

You are attempting to explain RF shadow and how it can cause lack of coverage. What common building item frequently causes RF shadow and must be accounted for in coverage plans?

What factor is likely to cause the least impact on the application layer throughput of an 802.11n client station in a 2.4 GHz HT BSS?

What is an advantage of using WPA3-Personal instead of WPA2-Personal as a security solution for 802.11 networks?

What facts are true regarding controllers and APs in a Split MAC architecture?

The IEEE 802.11-2012 standard requires VHT capable devices to be backward compatible with devices using which other 802.11 physical layer specifications (PHYs)?

Which one of the following is not a factor considered when calculating the Link Budget for an outdoor point-to- point WLAN bridge link?

What is appended to the end of each 802.11 data frame after the payload?

You are attempting to locate the cause of a performance problem in two WLAN cells in a mostly overlapping coverage area. You note that one AP is on channel 1 and the other is on channel 2. When you document your findings, what term do you use to describe the problem in this configuration?

When an ACK frame is not received by the transmitting STA, what is assumed?

In a mesh BSS (MBSS), according to the 802.11 standard, what device connect the mesh to an Ethernet network?

When compared with legacy Power Save mode, how does VHT TXOP power save improve battery life for devices on a WLAN?

You were previously onsite at XYZ’s facility to conduct a pre-deployment RF site survey. The WLAN has been deployed according to your recommendations and you are onsite again to perform a post-deployment validation survey.

When performing this type of post-deployment RF site survey voice over Wi-Fi, what is an action that must be performed?

You administer a WLAN that offers a guest SSID of GUESTNWORK. Users connect to the GUESTNWORK SSID, but report that they cannot browse the Internet. The devices simply report no Internet connection. What common problem causes this scenario?

As an RF wave propagates through space, the wave front experiences natural expansion that reduces its signal strength in an area. What describes the rate at which this expansion happens?

You are troubleshooting a client issue on a Windows laptop. The laptop can see and connect to 2.4 GHz APs, but is does not even see 5 GHz APs. While evaluating the issue, you determine that this problem is happening for all of the laptops of this model in the organization. Several other tablets connect on channel 48 and channel 52 in the same work areas. What is the likely problem?

Option 43 must be configured to allow access points to locate controllers. In what network service should this option be configured?

A natural disaster has occurred in a remote area that is approximately 57 miles from the response team headquarters. The response team must implement a local wireless network using 802.11 WLAN access points. What is the best method, of those listed, for implementation of a network back-haul for communications across the Internet in this

scenario?

When a client station sends a broadcast probe request frame with a wildcard SSID, how do APs respond?

You are reporting on the RF environment in your facility. The manager asks you to describe the noise floor noted in the report. Which of the following is the best explanation?

In a long-distance RF link, what statement about Fade Margin is true?

The BSA of an AP covers the area used by the sales and marketing department. Thirty-five stations operate in this space. The users indicate that they need more throughput and all stations are 5 GHz capable 802.11ac clients. The current AP configuration uses 20 MHz channels in both 2.4 GHz and 5 GHz. What is the least expensive solution available for increasing throughput for these users without implementing configuration options that are not recommended?

You are a small business wireless network consultant and provide WLAN services for various companies. You receive a call from one of your customers stating that their laptop computers suddenly started experiencing much slower data transfers while connected to the WLAN. This company is located in a multi-tenant office building and the WLAN was

designed to support laptops, tablets and mobile phones. What could cause a sudden change in performance for the laptop computers?

You are managing a wireless access point in autonomous mode using the Web based interface. You capture traffic during this management task and notice that you can see the HTML code of the Web pages used for access point management. What error in administration could be the cause of this security concern?

Your consulting firm has recently been hired to complete a site survey for a company desiring an indoor coverage WI-AN. Your engineers use predictive design software for the task, but the company insists on a pre-design site visit.

What task should be performed as part of the pre-design visit to prepare for a predictive design?

A WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB loss. If the cable is connected to an antenna with 9dBi gain, what is the EIRP at the antenna element?

What statement about 802.11 WLAN bridges is true?

An 802.11 WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB of loss. The cable is connected to an antenna with 16 dBi of gain. What is the power level at the Intentional Radiator?

You must plan for POE in an office environment. Which one of these devices is least likely to be a POE PSE?