To monitor the performance of vSAN File Services, the vSAN administrator must enable both the vSAN File Services and the vSAN Performance Service. The vSAN File Services provides SMB file shares to host clients, while the vSAN Performance Service collects and analyzes performance statistics and displays them in the vSphere Client. The other services are not related to vSAN File Services performance monitoring. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 9, Objective 7.4; [vSAN File Services]; [vSAN Performance Service]

To ensure that any virtual machines that are created are placed in the appropriate site, the administrator needs to create VM/Host groups for the two sites and create a storage policy that includes site affinity rules and apply to VMs. VM/Host groups allow the administrator to group virtual machines and hosts based on their location or preference. Site affinity rules specify which site a virtual machine should be placed on or prefer to run on. A single VM/Host group across both sites would not allow the administrator to control the placement of virtual machines. Putting the VMs in a vSphere DRS group or in the correct VM group would not affect their site affinity. References: 1, page 12; 2, section 3.2

 To design a HCI Mesh solution with VMware vSAN and VMware vSphere High Availability (HA), two considerations that the architect should assess are: A minimum of three nodes are required within the client cluster for vSphere HA to work. This is because vSphere HA needs at least three nodes in a cluster to form a quorum and elect a master host that monitors the availability of other hosts and VMs. If there are less than three nodes in a cluster, vSphere HA cannot function properly and might fail to detect or respond to host or VM failures. If vSphere HA is to work with HCI Mesh, Datastore with All Paths Down (APD) must be configured to Power off and restart VMs. This is because APD is a condition that occurs when a storage device becomes inaccessible due to loss of physical connectivity, resulting in I/O errors or timeouts for VMs that use that device. When using HCI Mesh, APD can happen if the network connection between the client cluster and the server cluster is lost or disrupted, causing the remote datastore to become unavailable. To ensure that vSphere HA can restart the affected VMs on another host that has access to their storage, Datastore with APD must be set to Power off and restart VMs in the vSphere HA settings. The other options are not correct. A server vSAN cluster can serve its local datastore up to 15 client vSAN clusters, not five. This is the maximum number of client clusters that can mount a remote datastore from a server cluster using HCI Mesh. A client cluster can mount up to five remote datastores from one or more vSAN server clusters, not ten. This is the maximum number of remote datastores that can be mounted by a client cluster using HCI Mesh. References: VMware vSAN HCI Mesh; vSphere Availability; Handling All Paths Down (APD) Conditions

To make sure that Skyline online health will work for vSAN, two requirements must be met: enable CEIP and join the program, and have a working Internet connection. CEIP stands for Customer Experience Improvement Program, which is a voluntary program that collects anonymous product usage data from customers who participate in it. By enabling CEIP and joining the program, customers can benefit from Skyline online health, which provides proactivenotifications and recommendations for software and hardware issues based on VMware Analytics Cloud. A working Internet connection is also required for Skyline online health to communicate with VMware Analytics Cloud and receive online notifications. The other options are not requirements for Skyline online health. References: About the vSAN Skyline Health; Skyline Health

A durability component is a temporary component that is created when a host or disk group is placed in maintenance mode with the Ensure data accessibility option, or when a host or disk group fails unexpectedly. A durability component improves the availability of data by maintaining the required number of failures to tolerate (FTT) until the original component is restored or rebuilt. A durability component also speeds up the resynchronization process by reducing the amount of data that needs to be copied. The other characteristics are not applicable to a durability component. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 10, Objective 6.8; [Durability Components]

To spread the components across storage devices as much as possible, the vSAN administrator can configure disk striping in either OSA or ESA. Disk striping is a policy attribute that defines the number of capacity devices across which each replica of a storage object is striped. A higher number of stripes can result in better performance and availability, but also consumes more storage space. Disk striping can be configured in OSA by using the Number of disk stripes per object policy attribute, or in ESA by using the Striping Width policy attribute12 References: 1: VMware vSAN Specialist v2 Exam Preparation Guide, page 14 2: VMware vSAN Design and Sizing Guide, page 32

The two prerequisites for using the TRIM and UNMAP capability of vSAN are:

• B. The vSAN cluster is an all-flash architecture. TRIM and UNMAP are only supported on all-flash vSAN clusters, as they can reclaim space from flash devices that use thin provisioning. TRIM and UNMAP are not supported on hybrid vSAN clusters, as they cannot reclaim space from magnetic disks that use thick provisioning1.
• D. TRIM and UNMAP is enabled. TRIM and UNMAP are disabled by default in vSAN, as they might have a performance impact on some workloads. To enable TRIM and UNMAP on a vSAN cluster, the administrator must use the following RVC command: vsan.unmap_support –enable2. After enabling TRIM and UNMAP, the administrator must power off and then power on all VMs that use the vSAN datastore.